Product Name | LSAW Steel Pipe |
Process | LSAW-UO(UOE), RB (RBE),JCO(JCOE) DSAW -Double Submerged arc welded |
Standard | API 5L,API 5CT,ASTM 53,EN10219,GB/T3091,GB/T9711 |
Certificate | ISO9001 ISO45001 IS014001 BV BC1 EN10219 EN10210 ASTM A500/501 JIS G3466 EPD PHD |
Out Diameter | 406mm-1500mm |
Wall Thickness | 8-50mm |
Length | 1-12M or as request |
Grade | API X42 X52 X60 X65 X70 GR.A GR.B GR.C,S275J0H,S355JRH,S355J0H,S355J2H,etc |
Surface | Fusion bond Epoxy coating, Coal Tar Epoxy, 3PE, Vanish Coating, Bitumen Coating, Black Oil coating as per customer's requirement |
Test | Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield strength, Elongation), Technical Properties (Flattening Test, Bending Test, Blow Test, Impact Test), Exterior Size Inspection, Hydrostatic Test, X-ray Test. |
MOQ | 5 Tons |
END | Plain,Bevelled |
Package | In bundles ,loose piece. |
Chemical composition-wall thickness≤40mm |
||||||||
Steel Grade |
% by mass, maximum |
|||||||
Steel Name |
Steel Number |
C |
Si |
Mn |
P |
S |
N |
|
≤40 | >40≤120 | |||||||
S355J0H |
1.0547 |
0.22 |
0.22 |
0.55 |
1.60 |
0.035 |
0.035 |
0.009 |
● Bare pipe or Black / Varnish coating ( customized);
● In loose;
● Both ends with end protectors;
● Plain end , bevel end;
● Marking.
Bending Test— a sufficient length of pipe shall stand being bent cold through 90° around a cylindrical mandrel.
Flattening test-although testing is not required ,pipe shall be capable of meeting the flattening test requirements.
Hydro-static test—except as allowed ,each length of pipe shall be subjected to the hydro-static test without leakage through the pipe wall.
Nondestructive electric test-as an alternative to the hydro-static test ,the full body of each pipe shall be tested with a nondestructive electric test . where nondestructive electric test is performed,the lengths shall be marked with the letters”NDE”
The ultrasonic testing
The eddy current examination
Hydrostatic Testing
NDT(RT) Testing
NDT(UT) Testing
MECHANICAL PROPERTIES OF LSAW(JCOE) STEEL PIPE W.T ≤40mm |
|||||||||
Steel Grade |
Minimum Yield Strength (Mp) |
Tensile Strength (Mp) |
Minimum Elongation % |
Minimum Impact J |
|||||
Specified Thickness (mm) |
Specified Thickness (mm) |
Specified Thickness (mm) |
At test temperature of |
||||||
Steel Name |
Steel Number |
≤16 |
>16≤40 |
≤3 |
>3 ≤40 |
≤40 |
-20℃ |
0℃ |
20℃ |
S335J0H |
1.0547 |
355 |
345 |
510-580 |
470-630 |
20 |
- |
27 |
- |