| Lebitso la Sehlahisoa | liphaephe tsa tšepe tse se nang sekoli |
| Boitsebiso/Kereiti | 1010,1026,X42,X46,X52,X56,X60,X70,ASTM A106,ST52,ST37,ST45,ST45. |
| E tloaelehileng | API, ASTM A530, ASTM A519, ASTM A53/A106 |
| Bophara ba Kantle (OD) | 13.7-762mm |
| Botenya | 2-80mm |
| Bolelele | 1-12m, Bolelele bo tsitsitseng, bolelele bo sa reroang kapa kamoo ho hlokahalang |
| Teko | Tlhahlobo ea Likarolo tsa Lik'hemik'hale, Thepa ea Mechanical, Thepa ea Tekheniki, Boholo ba Kantle, Teko e sa Senyeheng |
| Melemo | Theko ea tlholisano, Netefatso ea boleng, Nako e khuts'oane ea ho fana ka thepa, Tšebeletso e Phahameng, Bongata bo fokolang bo nyane |
| Mokhoa | Tšoara e Phuthiloe |
| E tloaelehileng | ASTM AISI DIN JIS GB EN |
| Kopo | Kaho, Indasteri, mekhabiso le lijo jj. |
| Phepelo ea Khoeli le Khoeli | Lithane tse 5000 |
| Nako ea thomello | Matsatsi a 7-10 a Mosebetsi kamora ho kenya depositi |
| Sephutheloana | Sephutheloana sa Plywood/Pallet kapa Sephutheloana se seng sa ho Romela kantle ho naha se Loketse ho Romelloa hole |
| Sebopeho sa Kereiti le Lik'hemik'hale (％) Bakeng sa API 5L PSL1 | |||||
| E tloaelehileng | Sehlopha | Sebopeho sa lik'hemik'hale (%) | |||
| C | Mn | P | S | ||
| API 5L | B | ≤0.28 | ≤1.20 | ≤0.030 | ≤0.030 |
| B | ≤0.26 | ≤1.20 | ≤0.030 | ≤0.030 | |
| Matlotlo a Mekaniki a Pipe ea Mohala e se Nang Seamless ea API 5L GR.B (PSL1) | ||||
| Matla a Tekanyo (MPa) | Matla a ho Tenyetseha (MPa) | Ho lelefatsaA% | ||
| psi | MPa | psi | MPa | Ho Lelefatsa (Bonyane) |
| 35,000 | 241 | 60,000 | 414 | 21~27 |
| Matlotlo a Mekaniki a Pipe ea Mohala e se Nang Seamless ea API 5L GR.B (PSL2) | |||||
| Matla a Tekanyo (MPa) | Matla a ho Tenyetseha (MPa) | Ho Lelefatsa A% | Tšusumetso (J) | ||
| psi | MPa | psi | MPa | Ho Lelefatsa (Bonyane) | Bonyane |
| 241 | 448 | 414 | 758 | 21~27 | 41(27) |
| 35,000 | 241 | 65,000 | 448 | 21~27 | 41(27) |
Teko ea NDT(UT)
Teko ea Kobeho
Teko ea Thepa ea Mechini
