ASTM A213, marka lagu daro shuruudaha sifooyinka adkaanta iyo adkaanta, tijaabooyinka soo socda ayaa sidoo kale loo baahan yahay: Tijaabada Fidsan iyo Tijaabada Fidsan.
ASTM A213 T11(ASME SA213 T11) waa daawaha hooseeyatuubo bir ah oo aan xuduud lahaynoo ka kooban 1.00–1.50% Cr iyo 0.44–0.65% Mo, oo leh sifooyin aad u fiican oo u adkaysta kulaylka, oo ku habboon codsiyada heerkulka sare iyo cadaadiska sare.
T11 waxaa badanaa loo isticmaalaa warshadahakuleyliyeyaasha, kuleyliyeyaasha aadka u sarreeya, iyo beddelayaasha kulaylka.Lambarka UNS: K11597.
Soo-saaraha iyo Xaaladda
Tuubooyinka birta ah ee ASTM A213 T11 waa in lagu sameeyaa habka aan kala go 'lahayn waana in lagu sameeyaa mid kulul ama mid qabow, sida ku cad.
Daaweynta Kulaylka
Tuubooyinka birta ah ee T11 waa in dib loo kululeeyaa si loogu daweeyo kulaylka iyadoo la raacayo hababka soo socda, daaweynta kulaylkana waa in si gaar ah loo sameeyaa marka lagu daro kuleylinta sameynta kulul.
| Fasal | Nooca daaweynta kulaylka | Qaboojinta ama Heerkulka Hoosaadka ah |
| ASTM A213 T11 | annaalka buuxa ama isothermal-ka ah | — |
| caadi u noqo oo dabeecad samee | 1200 ℉ [650 ℃] daqiiqo |
| Fasal | Halabuurka, % | ||||||
| C | Mn | P | S | Si | Cr | Mo | |
| T11 | 0.05 ~ 0.15 | 0.30 ~ 0.60 | ugu badnaan 0.025 | ugu badnaan 0.025 | 0.50 ~ 1.00 | 1.00 ~ 1.50 | 0.44 ~ 0.65 |
Sifooyinka Tijaabada
| Fasal | Xoogga Tijaabada | Xoogga Wax Soo Saarka | Kordhinta gudaha 2 inji ama 50 mm |
| T11 | 60 ksi [415 MPa] daqiiqo | 30 ksi [205 MPa] daqiiqo | 30% daqiq |
Astaamaha Adkaanta
| Fasal | Brinell/Vickers | Rockwell |
| T11 | 163 HBW / 170 HV | 85 HRB |
Shayada kale ee Tijaabada
Kala duwanaanshaha cabbirka
Cabbirrada tuubooyinka ASTM A213 T11 iyo dhumucda derbiga waxaa badanaa lagu qalabeeyaa dhexroor gudaha ah oo u dhexeeya 3.2 mm ilaa dhexroorka dibadda ee 127 mm, iyo dhumucda derbiga ugu yar laga bilaabo 0.4 mm ilaa 12.7 mm.
Cabbirrada kale ee tuubooyinka birta ah ee T11 ayaa sidoo kale la bixin karaa, iyadoo la raacayo dhammaan shuruudaha kale ee ASTM A213.
Dulqaadka Dhumucda Darbiga
Dulqaadka dhumucda derbiga waa in lagu go'aamiyaa labada xaaladood ee soo socda: haddii kala horraysiinta lagu qeexay dhumucda derbiga ugu yar ama dhumucda derbiga celceliska.
1.Dhumucda ugu yar ee derbiga: Waa inay u hoggaansantaa shuruudaha khuseeya ee Qaybta 9aad ee ASTM A1016.
| Dhexroorka Dibadda ee gudaha.[mm] | Dhumucda Darbiga, oo ah [mm] | |||
| 0.095 [2.4] iyo ka yar | In ka badan 0.095 ilaa 0.150 [2.4 ilaa 3.8], oo ay ku jiraan | In ka badan 0.150 ilaa 0.180 [3.8 ilaa 4.6], oo ay ku jiraan | In ka badan 0.180 [4.6] | |
| Tuubooyinka aan kala go 'lahayn ee kulul | ||||
| 4 [100] iyo ka yar | 0 - +40% | 0 - +35% | 0 - +33% | 0 - +28% |
| In ka badan 4 [100] | — | 0 - +35% | 0 - +33% | 0 - +28% |
| Tuubooyinka aan kala go 'lahayn ee qabow dhammeeyay | ||||
| 1 1/2 [38.1] iyo ka yar | 0 - +20% | |||
| In ka badan 1 1/2 [38.1] | 0 - +22% | |||
2.Dhumucda derbiga ee celceliska ahTuubooyinka qabow sameeya, kala duwanaanshaha la oggol yahay waa ±10%; tuubooyinka kulul sameeya, haddii aan si kale loo cayimin, shuruudaha waa inay u hoggaansamaan jadwalka soo socda.
| Dhexroorka Dibadda ee la cayimay, gudaha [mm] | Dulqaadka laga helay cayimay |
| 0.405 ilaa 2.875 [10.3 ilaa 73.0] oo ay ku jiraan, dhammaan saamiga t/D | -12.5 - 20% |
| Ka sarreeya 2.875 [73.0]. t/D ≤ 5 % | -12.5 - 22.5% |
| Ka sarreeya 2.875 [73.0]. t/D ＞ 5% | -12.5 - 15 % |
Kormeerka Dhexroorka Dibadda
Kormeerka Dhumucda Darbiga
Kormeerka Dhammaadka
Kormeerka Toosnaanta
Kormeerka UT
Kormeerka Muuqaalka
Tuubooyinka birta ah ee ASTM A213 T11 ayaa si weyn loo isticmaalaa sababtoo ah waxqabadkooda aadka u wanaagsan, gaar ahaan kuleyliyeyaasha, kuleyliyeyaasha sare, beddelayaasha kulaylka, dhuumaha kiimikada iyo weelasha, iyo sidoo kale qaybaha kale ee heerkulka sare leh.
Qalabka:Tuubooyinka iyo qalabka birta ah ee ASTM A213 T11 oo aan kala go 'lahayn;
Cabbirka:1/8" ilaa 24", ama loo habeeyey iyadoo loo eegayo shuruudahaaga;
Dhererka:Dherer aan kala sooc lahayn ama la jaray si loo dalbado;
Baakadaha:Dahaadh madow, darafyo godan, ilaaliyayaal dhammaadka tuubooyinka, sanduuqyo alwaax ah, iwm.
Taageerada:Shahaadada IBR, kormeerka TPI, MTC, jarista, farsamaynta, iyo habaynta;
MOQ:1 m;
Shuruudaha Lacag-bixinta:T/T ama L/C;
Qiimaha:Nala soo xiriir si aad u hesho qiimaha ugu dambeeyay ee tuubooyinka birta ah ee T11;
Tuubooyinka birta ah ee aan kala go 'lahayn ee JIS G3441
ASTM A519 Daawaha tuubo bir ah oo aan xuduud lahayn
ASTM A335 Daawaha pie bir ah oo aan xuduud lahayn
